Calibration Method Guidelines
Document Name | Author(s) | Description | |
---|---|---|---|
Survey Protocol for Geometric SAR Sensor Analysis | U.Balss et al. | This technical note (DLR-FRM4SAR-TN-200,Issue 1.4 ,2018-04-26) aims at defining a protocol for performing the measurements and corrections for a proper survey | |
Corner Reflector Deployment for SAR Geometric Calibration and Performance Assessment | A.Schubert et al. | This technical note (UZH-FRM4SAR-TN-100, Issue 1.03, 2018-08-22) aims at explaining how to deploy a proper site based on Corner Reflectors | |
Retrieval of the aerosol phase function from CIMEL C138 measurements | F. Zagolski et al. | The objective here is to describe the different steps required to process the CIMEL data in order to derive the aerosol phase function. | |
Introducing the IOP in the 6S code | R.Santer et.al. | This document describes how to input the aerosol IOPs in the 6S. | |
Best Practice Guidelines for Pre-Launch Characterization and Calibration of Instruments for PAssive Optical Remote Sensing | R. U. Datla et al. | The pre-launch characterization and calibration of remote sensing instruments should be planned and carried out in conjunction with their design and development to meet the mission requirement | |
Optical Sensors High Resolution Geometry Validation Methodology | A. Gruen et al. | Validation of Geometry for High Resolution Optical Sensors |